Відео

Merci pour cette vidéo. Un tuyau bouché 😂 et de la crasse Tout marche impec

didn't work...still leaking

I had a similar problem but not exactly the same. The machine would blink six times pause and then blink six times and pause continuously. Held down both buttons, no help. Called Nespresso and they had me do a factory reset which was no help. they had me try some numerous things but nothing helped. Being that it was past warranted I figured I'd give it a shot and take it apart. I used Adrian's instructions on how to take it apart. (thanks Adrian) What I found was the circuit board had a cable that had three wires going to it, the middle wire was pushed out of its connector, you could push the wire back into connector but it would come out again if you pulled on it. vibration on the machine could cause the wire to come out again. so if you look carefully there's a tab on the end of The Wire that needs to be bent out so the wire stays in place. Hopefully this helps out anybody who has this problem.

I noticed the small silicone rim already on the original nespresso capsules 🤔 It would be interesting to know if someone could use a tiny flat silicone o-ring or a silicone rubber ring and simply put it on the alternative capsules.. I mean in a way that the ring can be pulled off and re-used? Maybe theres a way but I couldn't find such mall gasket rings online so far. Maybe its worth to try this option 👍

Thank you Adrian for making this and showing it to people 👍🙂 I had disassembled my unit once because of a loose water pipe... Now years later I wondered if the brewing chamber maybe got a crack but it seems like the punching plate and area where the holes are, is the problem now 😉😊 Keep up the good work! Cheers George

Thank you!!!👏🏻👏🏻👏🏻👏🏻

10/10

You just saved me 400 euros <3

This video saved us. Thank you

Made it worse and now it's in the bin cos, unbelievably, no one repairs these things in the UK

Que puedo hacer si no sella bien y se tira el agua del depósito?

saced my life

Can't even on it with the stuck tray

Thank jouw voor dit video's 👍👍👍💪💪💪

My Krups ea893c10 (which have the same parts) it's clogging all the time with coffee because it's not disposing the used coffee coin anymore. Do you know can I fix this?

Got the same issue Did you find any solution?

I don't feel any spring effect

Greetings. I have the following problem that has arisen on the Krups EA8105 coffee machine. The "clean" and "calc" lights come on, I press the rinse button as indicated in the service manual and water only begins to come out of the foaming nozzle. When finished it stops and the 2 lights come back on. I have done the cleaning several times before without any problem, but now it is not working for me, am I doing something wrong? Thank you!

Hi I have a Nespresso Citiz, and it is having a problem that it is extracting coffee grounds or coffee beans at the same rate, what could be causing this problem?

Hallo, Dein Video ist sehr aufschlußreich und gut gemacht. Nun habe ich einen Frage dazu. Ich habe auch einen Tucson 2017 . Hast du die Original Rückfahrkamera angeschlossen , oder benutzt du die mitgelieferte Kamera des Android Radios. Trotz CanBus und richtiger Verkabelung funktioniert meine Original Kamera nicht. Im Radio ist auch alles eingestellt......

usually, when cockroaches live in any home appliances, they produce a distinctive smell that tells you we are living here. Please don't describe us 🤣🤣🤣🤣 I usually notice that especially in induction cokers when customers send them to be repaired

Could this issue cause my battery to die frequently?

in concluzie , ce a avut , strict ce piese ce defect >?

Please, password to download the Launcher apk

Hi friend, to download the apk it ask for a password, which is it?

My radio didn't come with a canbus and I have same problem no power to reverse camera is the decoder needed to get it to work?

Thank you very much, this exactly what I was looking for 👍🏿

the most horrible construction ever, full of plastic clips that bend and breaks, 1 hour to take apart, 1 hour to put it back ... ....whoever designed this needs to be jailed. that o-ring at the base should be easy to change but no, they put that plastic cover fused with the case , even if you take those 2 screws out , still not enough , the plastic round cover is fused with the case.... this is made to be put in the bin, not repaired. this company needs to learn to design things properly.

the most horrible construction ever, full of plastic clips that bend and breaks, 1 hour to take apart, 1 hour to put it back ... ....whoever designed this needs to be jailed. that o-ring at the base should be easy to change but no, they put that plastic cover fused with the case , even if you take those 2 screws out , still not enough , the plastic round cover is fused with the case.... this is made to be put in the bin, not repaired.

My water pump apparently needs to be changed as per Dolce Gusto's technical team. Every time I switch it for hot water for coffee, the machine turns off. Is it worth changing it or buying a new one since they're almost the same price?

thanks!!

Hi, I tried putting back the filter plate but it didn't properly go in and now it's jammed and won't come back out or allow the capsule tray in, please help!

Thanks, switch on hot water works fine

Hope it's not the bearing..I just watched your assembly video...Yikes! Looks like fun! Thoughts?

So interesting about the pod issue! Could you explain why my pixie brew unit won't lock tightly? Just started happening! It opens when the brewing starts...spring or??? Thanks so much!

I can see what’s happened. I couldn’t get access to Nespresso capsules so had been buying the lavazza ones and I think their “eco friendly” metals they use in them are the reason my capsules aren’t piercing correctly. They get crushed in the machine and barely have any coffee come out then when I open it all the hot water pours out in the back section.

Machine power is not turning on how to fix it?

solved...thank you!

Hi, Do you know why the sound of the radio goes away when you put it in reverse for back up camera?

Thx for your very helpful video. But the quality of krups is not only cheap it´s also very difficult to repair. It starts with the head of the screws on the button. I replace them by screws with a torx head. The plate in the brewing unit is made of plastic. No metal ( very cheap ). When I try to move it out of the brewing unit I do not get the plate in one part, I got three parts. I have to order a new one. Horrible engineering.

Update: i solved my issue. You don't need to unscrew your whole machine. You need to modify the button only. Like some of you here pointed out. I only took out the front panel plastic shield to access the power button. It's actually quite logical. When you plug the machine it's not supposed to turn on by itself, you have to turn it on. You can verify this by unplugging the SW (marked) white connector from the board leaving only the LED connector. Then when you plug the machine back you can use a small metal tip to touch the exposed SW connector prongs and check machine functionality this way. It's basically bypassing the button pressing on the top by just closing the circuit manually. The machine works for me. It was the wife that did it 😅. She ran tap water after washing the machine and water got into the button. I cleaned and dried the button circuit board and put it back in. All works fine. In your video the machine worked but entered in error state because the button was kept pressed by liquid presence in the button area thus sending a signal to the board to display error.

I have the exact problem with mine. Stopped working just like that and I assumed it was because my wife washed the top of the machine with soaked rag and it burned the circuits or something. But now that I see your video or looks like a mainboard problem. I would look for spare parts.

Where did you source the battery

Grrr.. I hate when things break unexpectedly. Mine got clogged after following the descaling tutorial, it was working well before that so I regret even starting that process. Now I have to disassemble lol 😅Thanks for the advise!

Thank you very much for the tip. ❤

They don't make it easy, do they? I was waiting for the blood damage :) Excellent video showing what a tricky job it is, even for an experienced repairer. My problem is that the coffee capsules are not being pierced so I get neither water nor coffee! I've nothing to lose, so I'll strip it down as described by Adrian, clean it all and see if it works after reassembly - if I succeed in reassembling it, of course.

Omg SUBBED you have noo idea how grateful I am.. thank you sooo much!!! I just fixed my 18 year-old Nespresso. This lady has been with me since I was single, so it was hard thinking it was her end. Must admit I haven't descaled in two years, plus I've been using non Nespresso capsules. Firstly, I got a toothbrush and cleaned the plate, didn't work. It was too complicated to disassemble a 1st gen Nespresso, so I got a toothbrush, then a toothpick and carefully cleaned the spout. I was scared that I was poking the insides wrongly, but it worked!!! The toothpick unclogged whatever was blocking the flow. I was so ready to use my Karcher steam, but I didn't need to. Cleaning the spout did the trick! I'll probably clean it more with a thin needle and perhaps a steam cleaner tomorrow. Yay, now we have coffee tomorrow morning. Bless you!!!

How to remove the plate percutor i tried as you show in piccolo but i couldnt remove it

Omg! I feel so dumb 🤣 gracias!!

Thanks for this guide. Instead of buying a new machine, I decided to try and repair it. Replaced the pump, and now it works again. But damn those oval head screws are a nightmare. Made the tool, and it helped, but will go to hardware store and see if I can get some replacements that are easier to work with. BTW, recommend to disassemble machine first, so you can identify the exact pump type. The website where I bought the pump, suggested a different pump type for this machine. Not sure if it was compatible. Anyhow I found the exact same pump that was originally installed, and purchased that instead.